High-Temperature Furnaces with SiC Rod Heating up to 1600 °C

These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C.  The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Tmax 1400 °C, 1500 °C, 1550 °C or 1600 °C
Working temperature 1500 °C (for high-temperature furnaces HTC ../16), increased wear and tear must be expected in case of working at higher temperatures
Furnace chamber lined with first-class, long-life fiber material, unclassified
Housing made of sheets of textured stainless steel
Dual shell housing for low external temperatures and high stability
Optional flap door (HTC) which can be used as work platform or lift door (HTCT) with hot surface facing away from the operator (High-temperature furnace HTCT 01/16 only with lift door)
Switching system with solid-state-relays, power tuned to the SiC rods
Easy replacement of heating rods
Adjustable air inlet opening, exhaust air opening in the roof
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
Controls description see page 60

Additional  equipment
Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
Square saggar for charging of up to three layers see page 12
Lid for top saggar
Manual or automatic gas supply system
Process control and documentation via VCD software package for monitoring, documentation and control see page 63

1Heating only between two phases    
*Please see page 60 for more information about supply voltage
2Plus maximum 240 mm for models HTCT when open    
3If connected at 230 V 1/N/PE rsp. 400 V 3/N/PE