High-Temperature Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C

Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where the highest precision is needed. Oustanding temperature uniformity and practical details set unbeatable quality benchmarks. For configuration for your processes, these furnaces can be extended with extras from our extensive option list.

Tmax 1600 °C, 1750 °C, or 1800 °C
Recommended working temperature 1750 °C (for models HT ../18), increased wear and tear must be expected in case of working at higher temperatures
Dual shell housing with fan cooling for low shell temperatures
Heating from both sides via molybdenum disilicide heating elements
High-quality fiber insulation backed by special insulation
Side insulation constructed with tongue and groove blocks provides for low heat loss to the outside
Long-life roof insulation with special suspension
Chain-guided parallel swivel door for defined opening and closing of the door
Two-door design (front/back) for high-temperature furnaces > HT 276/..
Labyrinth sealing ensures the least possible temperature loss in the door area
Reinforced floor as protection for bottom insulation as standard from models HT 16/16 upwards
Vapor vent in the furnace roof
Heating elements switched via thyristors
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
Controls description see page 60